|
|
|
|
|
|
Extraction thimbles
|
|
|
Whatman cellulose and glass microfiber extraction thimbles are known for their purity and consistent high quality……
|
|
|
|
|
|
|
|
|
|
MiniTEX Local Extractor
|
|
|
MiniTEX 1000, 1400 Flexible, telescopic local extractor with very low pressure drop...
|
|
|
|
|
|
|
|
|
|
TERFU Local Extractors, 3-Joint
|
|
|
Local extractor with friction joint for worksites where great flexibilty is important, in 2" and 3" diameter.
|
|
|
|
|
|
|
|
|
|
MOVEX Local Filter Kits
|
|
|
The Movex range of Local Filter Kits is the complete solution for removing dust, fume and gases from your workplace. Your solution - delivered in a box!
|
|
|
|
|
|
|
|
|
|
TERFU Local Extractors, 2-Joint
|
|
|
Local extractor with friction joint for worksites where great flexibilty is important, in 2" and 3" diameter.
|
|
|
|
|
|
|
|
|
|
Telescopic Extractors TEX-2000
|
|
|
TEX 2000 with gas spring is a telescopic local extractor suitable for confined spaces, e.g. welding booths and workbenches.
|
|
|
|
|
|
|
|
|
|
Local Extractor Arms RX-1500, 2000, 3000 & 4000
|
|
|
RX-1500, 2000, 3000 & 4000 with gas spring are local extractors for e.g. welding worksites where great flexibility and efficient extraction are important....
|
|
|
|
|
|
|
|
|
|
Local Extractor Arms R-1500, 2000, 3000 & 4000
|
|
|
R-1500, 2000, 3000 & 4000 local extractors with gas springs are local extractors for all kinds of worksites where flexible design and efficienct extraction are important..
|
|
|
|
|
|
|
|
|
|
TERFU Brackets
|
|
|
Brackets for Local extractor Terfu, -Standard; powder painted sheet steel -RF; stainless steel SIS 2333 -ESD; Electrostatic Safe Device, certified EN 100015-1
|
|
|
|
|
|
|
|
|
|
TERFU Local Extractor, 1-Joint
|
|
|
Local extractor with friction joint for worksites where great flexibilty is important...
|
|
|
|
|
|
|
|
|
|
|
MiniTEX Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
TERFU Nozzles, Hoods & Reducers
|
|
|
Nozzles, hoods and reducers for Local extractor TERFU, -Standard; aluminium tubes, hoods in specified material -PP; Tubes and hoods in Polypropylene -ESD; Electrostatic Safe Device, certified EN 100015-1
|
|
|
|
|
|
|
|
|
|
|
Magnetic Nozzles & Hoses for Local Extractors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Suction Nozzles for Local Extractors
|
|
|
|
|
|
|
|
|
|
|
|
|
Local Extractor Arms RZX-4500,6500 & 8500
|
|
|
The MOVEX local extractor RZX-4500, 6500 & 8500 with gas spring is a local extractor with large working radius for e.g. welding worksites where great flexibility and afficient extraction are important...
|
|
|
|
|
|
|
|
|
|
Local Extractor Arms RZ-4500, 6500, 8500 & 10000
|
|
|
The MOVEX local extractor RZ-4500, 6500, 8500 & 10000 with gas spring is a local extractor with large working radius for e.g. welding worksites where sturdy design and efficient extraction are important...
|
|
|
|
|
|
|
|
|
|
|
Direct Driven Fans
|
|
|
MOVEX fans are designed to operate reliably in polluted air (e.g. welding fumes, exhaust fumes, etc.) with no deterioration in performance...
|
|
|
|
|
|
|
|
|
|
|
Additional Kits for Mobile Filter Unit 70F
|
|
|
For more information detailing what is included in each kit click here.
|
|
|
|
|
|
|
|
|
|
|
Ceiling Brackets for Local Extractors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hoods for Local Extractors
|
|
|
|
|
|
|
|
|
|
|
|
|
Corning Pyrex Coarse and Extra Coarse Fritted Thimbles
|
|
|
These PYREX® coarse porosity fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 130mm long.
|
|
|
|
|
|
|
|
|
|
PYREX 250mL Extractor System with Soxhlet Extractor and Friedrichs Condenser
|
|
|
This is an efficient 250mL PYREX extraction apparatus for general purpose use. Consists of a Soxhlet extractor with a 24/40 inner Standard Taper joint on the bottom and a 45/50 outer Standard Taper joint on the top, a special Friedrichs condenser with a 45/50 inner Standard Taper joint on the bottom and a flask with a 24/40 outer Standard Taper joint. The condenser tubulation O.D. is 10mm.
|
|
|
|
|
|
|
|
|
|
PYREX Replacement 47mm Teflon Membranes for Accelerated One-Step Extractor-Concentrator System
|
|
|
These are replacement 47mm Teflon® membranes (20) for the PYREX® Accelerated One-Step™ Extractor/Concentrator System.
|
|
|
|
|
|
|
|
|
|
PYREX One Piece Continuous Heavier than Water Liquid/Liquid Extractor Concentrator System
|
|
|
This 1L PYREX single piece continuous liquid/liquid extractor is for use with solvents of heavier specific gravity than sample liquid being extracted. It is designed to meet EPA test method requirements outlined by SW-846, RCRA, and CLP. The sidearm is sealed to the extractor body just below the 45/50 Standard Taper outer joint. The sidearm is sealed higher on the body to reduce the chance of water spilling over while draining remaining solvent from the extractor body at the end of the extraction. Extraction can be performed outside the hood. However, as dictated by safe laboratory practices, we recommend that some type of ventilation system be used above or near the units in case of a drop in condenser water temperature or loss of condenser cold water supply. This system comes complete with PYREX Allihn condenser with a 45/50 Standard Taper inner joint and 500mL PYREX round bottom boiling flask with 24/40 Standard Taper outer joint.
|
|
|
|
|
|
|
|
|
|
|
SG-75 Standard Protection Grill, to be Mounted in D-75 Joint
|
List Price: $25.00
BLD Price $21.30
You Save $3.70!
|
|
|
|
|
|
|
